HeatGuard Remote Monitoring

See your plant.
Wherever you are.

See how your commercial heating installation is running, from individual boiler status to system temperatures, pressures and faults. HeatGuard Duo monitors up to two boilers and HeatGuard Quad up to four.

HeatGuard monitoring controller with its colour display
HeatGuard monitoring controller

Online dashboard

Check the whole installation from one screen.

See which boilers are available or running, spot active faults, and check when the monitoring unit last reported. Open the individual boiler views for flow and return readings, then use historical graphs to see how conditions have changed.

Customer Login

Monitoring

From each boiler to the whole system.

Your readings depend on the signals and sensors fitted for your installation.

Individual boilers

Check running, standby, enable and fault status where the boiler provides those signals. See lockout where wired, and compare each boiler’s flow and return temperatures and the difference between them.

System sensors

Track main flow and return temperatures and their difference (ΔT). Depending on the sensors fitted, add outside temperature and pressure readings for primary water, secondary water, hot water or gas.

Fault notifications

See faults in the portal and receive alerts in a configured WhatsApp group. Depending on the installation, conditions can include low temperature or pressure, loss of mains power, module faults and boiler lockout. Delivery depends on connectivity and service availability.

Heat metering

With a compatible external pulse-output heat meter, view heat output, cumulative energy in kWh, hourly totals and historical usage charts. The heat meter is supplied and installed separately.

Multi-boiler cascade

For compatible installations with KKM configured and commissioned, the dashboard shows cascade status, boiler demand and active boilers. Confirm the available cascade controls for your plant during specification. Remote boiler fault reset is unavailable.

Connectivity and local display

Integrated cellular data connects the unit to the portal without site broadband. Check connection, supply and battery condition where reported. The controller’s colour display shows configured readings on site.

Installation

Configured for your plant room.

HeatGuard is suited to permanent commercial boiler rooms, temporary hire installations and unattended sites. Individual boiler modules connect to the main controller using structured cabling. A competent engineer connects the sensors and boiler signals and commissions the system.

During a mains failure, battery-powered reporting is limited to GPS location. Live readings and boiler fault monitoring require mains power.

HeatGuard controller beside blue commercial boilers
HeatGuard controller in a commercial boiler-room illustration

Configurations

HeatGuard Duo and Quad.

Choose the configuration for your boiler count, then discuss which signals, sensors and readings you need.

HeatGuard Duo

For installations with up to two monitored boilers.

HeatGuard Quad

For installations with up to four monitored boilers.

Remote dashboard access, remote functions, cloud notifications and online history require an active online service. The controller’s local display is separate from that service.